Skip to content
FCS

SE PC Tri Set

$199.95
Tax included.

or make 4 interest-free payments of $49.99 AUD fortnightly with More info

NOTE: 3 Week Express Manufacture on Custom Orders.

Fin System

Click on the 'Volume Guide' in the tab above to find the recommended volume based on your skill level, height and weight.

To explore your desired dimensions and volumes in real time. Click here to use the Custom Board Builder.

* Note the volume calculation is a guide only. If in doubt please click here to contact us.

Stock Boards are constructed in PU (Standard 4x4x4 Glassing).

Boards Available in:
Standard Lamination – PU / PE
Other Materials – EPS / Epoxy

Made in Australia to the Highest Australian Standards from Premium Materials.

Storage:
Store in a board bag.
Store out of direct sunlight.

After Usage:
Rinse off after use.

Wax Removal:
Do not use chemical solvents to remove wax residue.

Damage:
Repair any dings immediately.

*Note this is a guide only. Contact us if any further information is required for the care and repair of your surfboard.

FCS II SHARP EYE PC Thruster Set – The SE template was developed by Marcio Zouvi and sits in the Performer Family.

The outline is very similar to the Performer and Accelerator templates with a touch more sweep and a little less area in the tip. Recently updated with carbon tissue inlays and AirCore construction, the SE fin is stiffer than the original version allowing it to harness more power and speed when pushed ultra hard through turns.

This all-rounder will release a bit quicker and feel a little looser compared to the Performer/Accelerator, but the flat inside face means it will respond very quickly when initiating a turn. Its perfect for light to medium weight surfers who surf fast and like to stay lively on their feet.





Ideal Conditions
A wide range of conditions, particularly good in critical overhead waves.
 
Board Types
Designed to fit the FCS II Fin System. 
For all board types. Best suited to performance and hybrid shortboards.
Fin Family and Specifications
Performer: Find Balance. A balance of speed, flow & response.



Medium
Sides

Base: 4.48" / 113.6mm
Depth: 4.55" / 115.4mm
Area: 15.13"² / 9761mm²
Sweep: 34.8º
Foil: Flat/Bev


Centre
Base: 4.48" / 113.6mm
Depth: 4.55" / 115.4mm
Area: 15.13"² / 9761mm²
Sweep: 34.8º
Foil: Flat/Bev

Large
Sides

Base: 4.59" / 116.5mm 
Depth: 4.66" / 118.3mm 
Area: 15.91"² / 10263mm² 
Sweep: 34.8º 
Foil: Flat/Bev


Centre
Base: 4.59" / 116.5mm 
Depth: 4.66" / 118.3mm 
Area: 15.91"² / 10263mm² 
Sweep: 34.8º 
Foil: Flat/Bev




Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

Volume Calculator

Your Ability
Your Height
6'9" / 206cm
Your Weight
309lbs / 140kg
Your Recommended Volume
--.-- L

The volume calculation is a guide only. Your recommended size may be different to your recommended volume due to your height, weight or skill level for this particular model.

Your recommended size is the calculation based on the data you enter above.