Skip to content
FCS

FCS SE PC Tri Quad Set

$299.96
Tax included.

or make 4 interest-free payments of $74.99 AUD fortnightly with More info

Size
FCS II SHARPEYE PC Tri/Quad Set – The SE template was developed by Marcio Zouvi and sits in the Accelerator Family.

The outline is very similar to the Performer and Accelerator templates with a touch more sweep and a little less area in the tip. Recently updated with carbon tissue inlays and AirCore construction, the SE fin is stiffer than the original version allowing it to harness more power and speed when pushed ultra hard through turns.

This all-rounder will release a bit quicker and feel a little looser compared to the Performer/Accelerator, but the flat inside face means it will respond very quickly when initiating a turn. Its perfect for light to medium weight surfers who surf fast and like to stay lively on their feet.


The SE quad rear features the versatile Performer quad rear template. The pairings for the SE Tri-Quad sets are both intentionally undersized to work with the Inferno FT and other quad specific models. (M Sides + XS Quads, L Sides + S Quads). The SE quad set will feel drivey and balanced with extra release off the lip compared to other quad sets.




Ideal Conditions
A wide range of conditions, particularly good in critical overhead waves.
 
Board Types
Designed to fit the FCS II Fin System. 
For all board types. Best suited to performance and hybrid shortboards.
Fin Family and Specifications
Accelerator: Find Control. Speed, flow and response with added control.



Medium
Sides

Base: 4.48" / 113.6mm
Depth: 4.55" / 115.4mm
Area: 15.13"² / 9761mm²
Sweep: 34.8º
Foil: Flat/Bev


Rear
Base: 3.55" / 90.2mm
Depth: 3.70" / 94mm
Area: 9.53"² / 6150mm²
Sweep: 32.4º
Foil: 80/20

Large
Sides

Base: 4.59" / 116.5mm 
Depth: 4.66" / 118.3mm 
Area: 15.91"² / 10263mm² 
Sweep: 34.8º 
Foil: Flat/Bev


Rear
Base: 3.83" / 97mm 
Depth: 3.99" / 101mm 
Area: 11.08"² / 7150mm² 
Sweep: 32.4º 
Foil: 80/20




Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.